Wifi: Difference between revisions

From miki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 8: Line 8:
<source lang="bash">
<source lang="bash">
sudo iwlist scan
sudo iwlist scan
sudo iw dev wlan0 scan
sudo iw dev wlan0 scan # wlan0 or wlp1s0 or ...
</source>
</source>
* <tt>[[Linux Commands#rfkill|rfkill]]</tt>, show state of RF SW/HW kill switch (WiFi / BT / ...)
* <tt>[[Linux Commands#rfkill|rfkill]]</tt>, show state of RF SW/HW kill switch (WiFi / BT / ...)
<source lang="bash">rfkill list all</source>
<source lang="bash">rfkill list all</source>

If using Network Manager:
<source lang="bash">
nmcli connection show
# NAME UUID TYPE DEVICE
# testing 1eba2547-2cc2-4785-9288-f205aa6f533d wifi wlp1s0
nmcli connection show "testing"
nmcli -f GENERAL,WIFI-PROPERTIES dev show wlp1s0
</source>

== Utilities ==

=== Wavemon ===
See [[Linux commands]].


== Troubleshoot wifi ==
== Troubleshoot wifi ==
Line 18: Line 32:
lsusb # if wifi usb device
lsusb # if wifi usb device
lspci # if wifi pci device
lspci # if wifi pci device
lspci | egrep -i 'wifi|wlan|wireless'


# Check if device has an interface
# Check if device has an interface
Line 25: Line 40:
ifconfig
ifconfig


# Check signal quality

sudo iwconfig wlp1s0|grep -i quality
# Link Quality=52/70 Signal level=-58 dBm
nmcli dev wifi
# IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY
# testing Infra 13 270 Mbit/s 70 ▂▄▆_ WPA2
watch -n 1 cat /proc/net/wireless
# Inter-| sta-| Quality | Discarded packets | Missed | WE
# face | tus | link level noise | nwid crypt frag retry misc | beacon | 22
# wlp1s0: 0000 52. -58. -256 0 0 0 0 182 0
</source>
</source>



Revision as of 16:48, 10 June 2019

Commands

  • iwconfig, get information or configure a wireless network interface
sudo iwconfig           # Get information
sudo iwconfig wlan0     # Configure
  • iwlist, get more detailed wireless information from a wireless interface
sudo iwlist scan
sudo iw dev wlan0 scan   # wlan0 or wlp1s0 or ...
  • rfkill, show state of RF SW/HW kill switch (WiFi / BT / ...)
rfkill list all

If using Network Manager:

nmcli connection show
# NAME                UUID                                  TYPE      DEVICE    
# testing             1eba2547-2cc2-4785-9288-f205aa6f533d  wifi      wlp1s0 
nmcli connection show "testing"
nmcli -f GENERAL,WIFI-PROPERTIES dev show wlp1s0

Utilities

Wavemon

See Linux commands.

Troubleshoot wifi

# Check device
lsusb                # if wifi usb device
lspci                # if wifi pci device
lspci | egrep -i 'wifi|wlan|wireless'

# Check if device has an interface
iwconfig

# Check status interfaces
ifconfig

# Check signal quality
sudo iwconfig wlp1s0|grep -i quality
# Link Quality=52/70  Signal level=-58 dBm  
nmcli dev wifi
# IN-USE  SSID           MODE   CHAN  RATE        SIGNAL  BARS  SECURITY 
#         testing        Infra  13    270 Mbit/s  70      ▂▄▆_  WPA2     
watch -n 1 cat /proc/net/wireless
# Inter-| sta-|   Quality        |   Discarded packets               | Missed | WE
#  face | tus | link level noise |  nwid  crypt   frag  retry   misc | beacon | 22
# wlp1s0: 0000   52.  -58.  -256        0      0      0      0    182        0


Wifi is either controlled by NetworkManager or via the command line.

NetworkManager
Command file
  • See file /etc/network/interfaces. See man page man interfaces
  • For WPA, see file /etc/wpa_supplicant/wpa_supplicant.conf.
Miscellaneous
  • Wireless deauthentication code from [1]:
  • About syslog wlan0: deauthenticated from 00:1d:7e:0c:24:5e (Reason: 14), see [2]:
    That means that the WPA encryption code is failing and the packet is corrupt. I would worry about that corrupt beacon from the AP.
  • Troubleshooting WiFi (opensuse post)
  • Getting info on WiFi (opensuse post)
3 Deauthenticated because sending station is leaving (or has left) IBSS or ESS.
14 MIC failure.