Configuration Sagem B Box: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
(→Wi-Fi) |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 2: | Line 2: | ||
== Wi-Fi == |
== Wi-Fi == |
||
* Both |
* '''Both channels disabled''' (to avoid interferences with main Wi-Fi). |
||
* Previous settings: |
* Previous settings: |
||
:* One SSID disabled (two separate 2.4 / 5GHz network) |
:* One SSID disabled (two separate 2.4 / 5GHz network) |
||
:* Network <code>WiFi-2.4-60CA) |
:* Network <code>WiFi-2.4-60CA)</code> |
||
:* Network <code>WiFi-5.0-60CA) |
:* Network <code>WiFi-5.0-60CA)</code> |
||
== LAN Servers == |
== LAN Servers == |
||
| Line 71: | Line 71: | ||
;Static addresses |
;Static addresses |
||
* None |
* None |
||
Note: there was one static address defined (MAC ending with <code>:E1</code>), IP 192.168.1.26, which I deleted because unused apparently. However it might have been created by the TP-Link Deco device (DecoMeshX60, whose MAC also ended in <code>:E1</code>). |
|||
== Issues == |
== Issues == |
||
Latest revision as of 13:59, 14 September 2023
Wi-Fi
- Both channels disabled (to avoid interferences with main Wi-Fi).
- Previous settings:
- One SSID disabled (two separate 2.4 / 5GHz network)
- Network
WiFi-2.4-60CA) - Network
WiFi-5.0-60CA)
LAN Servers
(→ LAN Servers)
| Name | Activated | Protocol | Public start port | Public end port | LAN start port | Local IP Address |
|---|---|---|---|---|---|---|
| Griffin - Amule | Yes | TCP | 4911 | 4911 | 4911 | 172.19.100.6 |
| Griffin - Amule | Yes | DP | 4672 | 4672 | 4672 | 172.19.100.6 |
| Griffin - Amule | Yes | DP | 4914 | 4914 | 4914 | 172.19.100.6 |
My Modem
General
(→ My Modem → General)
| Variable | Value |
|---|---|
| Serial Number | LK18034DP342776 |
| WAN MAC Address | 08:3E:5D:8B:60:CA |
DHCP
(→ My Modem → DHCP)
| Variable | Value |
|---|---|
| Physical Address | |
| IP Address | 192.168.1.1 |
| Subnet Mask | 255.255.255.0 |
| IP Address Distribution | DHCP Server |
| Subnet Mask | 255.255.255.0 |
| IPv4 Pool Start | 192.168.1.2 |
| IPv4 Pool End | 192.168.1.63 |
| IPv4 TV Pool Start | 192.168.1.64 |
| IPv4 TV Pool End | 192.168.1.127 |
| Lease Time In Minutes | 86400 |
- Static addresses
- None
Note: there was one static address defined (MAC ending with :E1), IP 192.168.1.26, which I deleted because unused apparently. However it might have been created by the TP-Link Deco device (DecoMeshX60, whose MAC also ended in :E1).
Issues
- Issue: no local DNS to return IP addresses of computers in the LAN
- Workaround: use static DHCP lease and define the /etc/hosts accordingly.