Configuration Network Home: Difference between revisions

From miki
Jump to navigation Jump to search
 
(5 intermediate revisions by the same user not shown)
Line 3: Line 3:
* Devices
* Devices
** '''[[Configuration Sagem B Box|Sagem B Box]]'''
** '''[[Configuration Sagem B Box|Sagem B Box]]'''
** TP-Link Deco X60 -- AX5400 Whome Home Mesh Wi-Fi 6 System
⚫
** Wireless router '''[[Configuration Network Home#Wireless router Linksys WAP4400N|Linksys WAP4400N]]'''
** Synolgy NAS '''[[Configuration NAS Mnemosyne|Mnemosyne]]'''
** Synolgy NAS '''[[Configuration NAS Mnemosyne|Mnemosyne]]'''
** 100Mb/10Mb Hub (in the attic)
** 100Mb/10Mb Hub (in the attic)

** Desktop '''Gryphon''' - AMD 1333
** Desktop '''Unicorn''' - Dell GX280


Pending:
Pending:
* 1Gb/100Mb/10Mb switch ''D-Link DGS-1008D'' (in the attic)
* 1Gb/100Mb/10Mb switch ''D-Link DGS-1008D'' (in the attic)
* NAS ''Mnemosyne'' - Synology DS409+
* NAS ''Mnemosyne'' - Synology DS409+
* NAS ''Mystique'' - Synology


== Device Configuration ==
== Device Configuration ==


=== Wireless router Linksys WAP4400N ===
=== TP-Link Deco Mesh X60 - AX5400 ===
;Info
⚫
* IP Address: '''172.19.3.2'''
* Model: <code>Deco X60(EU) Ver:3.2</code>
* Host Name: '''manticore'''

* Device Name: '''manticoredev'''
;Install
* SSID: '''ManticoreNet'''
* '''Living Room''' Deco: close to modem.
* Hardware Version: '''Rev.01'''
* '''hallway''': On the shelf in the Hall.
* Software Version: '''1.2.19-ETSI''' (previous: 1.2.8-ETSI)
* '''bedroom''': On the shoe cupboard.
* Wireless Network Mode: '''B/G/N-Mixed'''

* Wireless Channel: '''Auto'''
;Config
* Security Mode: '''WPA2-Personal'''
* Set preferred connection for Deco ''Bedroom'' to Deco ''Hallway'' (because auto selection seems to always pick ''Living Room'', which gives weaker signal)
* Wireless Isolation (within SSID): '''Disabled'''
* Reserve address for '''voldemort''': 192.168.68.96.\
* Encryption: '''AES'''
* Create guest network


;Issue
Let's try the settings above (previous B/G-Mixed + WPA_Personal seems to work)
* Double router configuration, and I cannot add a static route on Sagem B-Box :-(. I cannot connect devices on the 2nd network from the sagem network.
* Workaround: connect PC to wifi to connect to these devices.


=== ADSL TV ===
;Troubleshooting frequent disconnect:
* DHCP server must be configured to give the following settings:
* Disable '''WMM''' (Wireless &rarr; Advanced Wireless Settings) (as per [https://community.linksys.com/t5/Wireless-Routers/QoS-and-WMM-settings-slow-internet-down-when-enabled/td-p/491854])
:* MAC Address: '''f4:5f:d4:9e:20:2e'''
:This seems to improve greatly stability, but my connection degrades to 1Mb/s, as per warning in WAP400N
⚫
:* IP address: '''192.168.1.64'''


== Old Device Configuration ==
== Old Device Configuration ==
* [[Configuration Scarlet Box|Scarlet Box]]
* [[Configuration Scarlet Box|Scarlet Box]]
⚫
* Wireless router '''[[Configuration Network Home#Wireless router Linksys WAP4400N|Linksys WAP4400N]]'''
* [[Configuration LaCie-CloudBox | '''LaCie-CloudBox''']] (dead)
* [[Configuration ASUS RT-N56U | '''ASUS RT-N56U''']] (dead)
* [[Configuration VDSL+ router | '''VDSL+ router''']] (dead)

Latest revision as of 07:15, 15 September 2023

Overview

  • Network name Hell
  • Devices
    • Sagem B Box
    • TP-Link Deco X60 -- AX5400 Whome Home Mesh Wi-Fi 6 System
    • Synolgy NAS Mnemosyne
    • 100Mb/10Mb Hub (in the attic)


Pending:

  • 1Gb/100Mb/10Mb switch D-Link DGS-1008D (in the attic)
  • NAS Mnemosyne - Synology DS409+
  • NAS Mystique - Synology

Device Configuration

TP-Link Deco Mesh X60 - AX5400

Info
  • Model: Deco X60(EU) Ver:3.2
Install
  • Living Room Deco: close to modem.
  • hallway: On the shelf in the Hall.
  • bedroom: On the shoe cupboard.
Config
  • Set preferred connection for Deco Bedroom to Deco Hallway (because auto selection seems to always pick Living Room, which gives weaker signal)
  • Reserve address for voldemort: 192.168.68.96.\
  • Create guest network
Issue
  • Double router configuration, and I cannot add a static route on Sagem B-Box :-(. I cannot connect devices on the 2nd network from the sagem network.
  • Workaround: connect PC to wifi to connect to these devices.

ADSL TV

  • DHCP server must be configured to give the following settings:
  • MAC Address: f4:5f:d4:9e:20:2e
  • IP address: 192.168.1.64

Old Device Configuration

Retrieved from "https://miki.immie.org/mediawiki/index.php?title=Configuration_Network_Home&oldid=17282"