Nxl67002 - AndLinux - Files: Difference between revisions

From miki
Jump to navigation Jump to search
 
(23 intermediate revisions by one other user not shown)
Line 1: Line 1:
__TOC__

These are the configuration files on '''[[Configuration NXP Dell Latitude D620 - AndLinux]]'''.

== Windows Host files ==
== Windows Host files ==


=== settings.txt ===
=== settings.txt ===
{{hiddenSourceFile|./andlinux/|settings.txt|<pre class="settings.txt">
Download [{{#file: settings.txt}} this file].
<pre>
mem=384
mem=384
root=/dev/cobd0
root=/dev/cobd0
Line 16: Line 19:
cofs1=D:\
cofs1=D:\
</pre>
</pre>
}}


== AndLinux files ==
=== hosts ===
{{hiddenSourceFile|c:\windows\system32\drivers\etc\|hosts|<pre class="hosts">
# Copyright (c) 1993-1999 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
#
# For example:
#
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host


127.0.0.1 localhost
=== /etc/fstab ===


192.168.11.150 andlinux
Download [{{#file: fstab}} this file].
<pre>
</pre>
}}

== AndLinux files ==
<small>Generated with script '''/home/beq06659/bin/generate_wiki_config_file_page.sh''' on host '''andLinux'''</small>

=== Directory /etc ===
'''fstab'''
{{pl2|{{hiddenSourceFile|/etc/|fstab|<source lang=text class="fstab">
# /etc/fstab: static file system information.
# /etc/fstab: static file system information.
#
#
Line 33: Line 63:
0 /mnt/winc cofs defaults,gid=samba,dmask=0775,fmask=0775 0 0
0 /mnt/winc cofs defaults,gid=samba,dmask=0775,fmask=0775 0 0
1 /mnt/wind cofs defaults,gid=samba,dmask=0775,fmask=0775 0 0
1 /mnt/wind cofs defaults,gid=samba,dmask=0775,fmask=0775 0 0
</pre>


</source>
=== /usr/local/bin/be ===
}} }}
Download [{{#file: be}} this file].<br>
=== Directory /etc/privoxy ===
Note that this script would ideally require to add the following line to <tt>/etc/sudoers</tt>:
'''set-network-config''' - This file must be '''chmod 755'''. Also the following line must be added to <tt>/etc/sudoers</tt>:
:<code> ALL ALL=(ALL) NOPASSWD: /etc/privoxy/set-network-config </code>
{{pl2|{{hiddenSourceFile|/etc/privoxy/|set-network-config|<source lang=bash class="set-network-config">
#! /bin/bash

# Exit if no network name given or if no corresponding configuration file
[ -n "$1" ] || exit 1

TARGET_FILE="config-$1"

[ -a "/etc/privoxy/$TARGET_FILE" ] || exit 1
ln -sf "$TARGET_FILE" /etc/privoxy/config
/etc/init.d/privoxy restart

</source>
}} }}
'''config-home.patch'''
{{pl2|{{hiddenSourceFile|/etc/privoxy/|config-home.patch|<source lang=diff class="config-home.patch">
--- config.original 2009-11-15 00:50:28.000000000 +0100
+++ config-home 2009-11-17 00:01:48.000000000 +0100
@@ -761,7 +761,7 @@
# listen-address 192.168.0.1:8118
#
#
-listen-address 127.0.0.1:8118
+listen-address :8118
#
#
# 4.2. toggle
</source>
}} }}
'''config-nxp.patch'''
{{pl2|{{hiddenSourceFile|/etc/privoxy/|config-nxp.patch|<source lang=diff class="config-nxp.patch">
--- config-home 2009-11-17 00:01:48.000000000 +0100
+++ config-nxp 2009-11-15 02:34:20.000000000 +0100
@@ -1250,6 +1250,13 @@
# that look like this:
#
# forward localhost/ .
+# nxp only:
+forward-socks5 / localhost:1080 .
+forward 192.168.*.*/ .
+forward 10.*.*.*/ .
+forward 127.*.*.*/ .
+forward 172.19.*.*/ .
+forward 134.27.*.* .
#
#
#
</source>
}} }}
'''config-nxp_auth''' - symlinked to <tt>config-nxp</tt>

'''config-nxp_direct.patch'''
{{pl2|{{hiddenSourceFile|/etc/privoxy/|config-nxp_direct.patch|<source lang=diff class="config-nxp_direct.patch">
--- config-nxp 2009-11-15 02:34:20.000000000 +0100
+++ config-nxp_direct 2009-11-16 16:14:23.000000000 +0100
@@ -1251,7 +1251,7 @@
#
# forward localhost/ .
# nxp only:
-forward-socks5 / localhost:1080 .
+forward / emea.nics.nxp.com:8080
forward 192.168.*.*/ .
forward 10.*.*.*/ .
forward 127.*.*.*/ .
</source>
}} }}
=== Directory /usr/local/bin ===
'''be''' - This script would ideally require to add the following line to <tt>/etc/sudoers</tt>:
:<code>ALL ALL=(ALL) NOPASSWD: /bin/loadkeys</code>
:<code>ALL ALL=(ALL) NOPASSWD: /bin/loadkeys</code>
{{pl2|{{hiddenSourceFile|/usr/local/bin/|be|<source lang=bash class="be">
<pre>
#!/bin/bash
#!/bin/bash


sudo loadkeys /usr/share/keymaps/i386/azerty/be2-latin1.kmap.gz
sudo loadkeys /usr/share/keymaps/i386/azerty/be2-latin1.kmap.gz
</pre>


</source>
=== ~/.bashrc ===
}} }}
Download [{{#file: .bashrc}} this file]. Everything before <tt>#### CUSTOMIZATION</tt> is the original file.
'''ssh-agent-refresh.sh'''
<source lang="bash">
{{pl2|{{hiddenSourceFile|/usr/local/bin/|ssh-agent-refresh.sh|<source lang=bash class="ssh-agent-refresh.sh">
#!/bin/bash
#
# This script will detect any running ssh-agent and restore the environment
# variable that would normally be created with the command
#
# % ssh-agent -s
#
# By default, this script looks for an existing ssh-agent process already running with
# same UID as the current shell. If none is found, a new ssh-agent process is launched.
# If the SSH_AUTH_SOCK is not specified, the script will try to find back the correct
# socket name. For this it looks for a socket named /tmp/ssh-*/agent.*, with same UID
# as current script.
#
# If the environment variable SSH_AUTH_SOCK is set, ssh-agent will use that socket name
# instead of generating a new one (on first invocation).
#
# Example of use:
# ssh-agent-refresh.sh
# if ( ssh-add -L | grep -q $USER ); then ssh-add -t 3600; fi
#
# Example with predefined SSH_AUTH_SOCK
# export SSH_AUTH_SOCK=/tmp/.ssh-agent-$USER
# ssh-agent-refresh.sh
# if ( ssh-add -L | grep -q $USER ); then ssh-add -t 3600; fi
#
# Example of output of ssh-agent -s:
#
# SSH_AUTH_SOCK=/tmp/ssh-VAjpOtefMI/agent.2112; export SSH_AUTH_SOCK;
# SSH_AGENT_PID=2568; export SSH_AGENT_PID;
# echo Agent pid 2568;

SSH_AGENT_PROCESS_NAME=ssh-agent

# Shell must be a login shell - for USER variable
if [ -z "$USER" ]; then
echo "ERROR! Environment variable USER not defined - you probably don't run a login shell"
exit 4
fi

# First see check that at most one instance of ssh-agent is running.
SSH_AGENT_COUNT=`ps -u $USER | grep -c "[/ ]${SSH_AGENT_PROCESS_NAME}\$"`
if [ $SSH_AGENT_COUNT -gt 1 ]; then
echo "ERROR! Several ssh-agent processes are running">/dev/stderr
exit 3
fi

# Third launch a new ssh-agent if none is running. We use variable SSH_AUTH_SOCK if defined
if [ $SSH_AGENT_COUNT -eq 0 ]; then
# Remove old /tmp/ssh-* directory if no ssh-agent process is running
rm -rf /tmp/ssh-*

if [ $SSH_AUTH_SOCK ]; then
ssh-agent -a "$SSH_AUTH_SOCK" -s
else
ssh-agent -s
fi
exit 1
fi

# Fourth, find back ssh-agent-pid We use the blob below because pidof doesn't filter based on process UID
SSH_AGENT_PID=`ps -u $USER | grep "[/ ]$SSH_AGENT_PROCESS_NAME$" | sed -r 's/^ *([0-9]*) .*$/\1/'`

# Finally find the socket that the running ssh-agent is attached to. We reuse variable SSH_AUTH_SOCK if it is defined.
if [ ! $SSH_AUTH_SOCK ]; then
SSH_AUTH_SOCK=`find /tmp -type s -user $USER -path "/tmp/ssh-*/agent.*"`
else
if [ -x "$SSH_AUTH_SOCK" ]; then
echo "ssh-agent process found (pid $SSH_AGENT_PID), but given socket does not exist ($SSH_AUTH_SOCK)!">/dev/stderr
exit 2
fi
fi

echo "SSH_AUTH_SOCK=$SSH_AUTH_SOCK; export SSH_AUTH_SOCK;"
echo "SSH_AGENT_PID=$SSH_AGENT_PID; export SSH_AGENT_PID;"
echo "echo Agent pid $SSH_AGENT_PID;"

exit 0

</source>
}} }}
=== Directory /home/beq06659 ===
'''.bashrc''' - Everything before <tt>#### CUSTOMIZATION</tt> is the original file.
{{pl2|{{hiddenSourceFile|/home/beq06659/|.bashrc|<source lang=bash class=".bashrc">
# ~/.bashrc: executed by bash(1) for non-login shells.
# ~/.bashrc: executed by bash(1) for non-login shells.
# see /usr/share/doc/bash/examples/startup-files (in the package bash-doc)
# see /usr/share/doc/bash/examples/startup-files (in the package bash-doc)
Line 166: Line 349:
alias df='df -h'
alias df='df -h'
alias du='du -h'
alias du='du -h'
alias grep='grep --color' # show differences in colour
alias grep='grep --color' # show matched string in colour
alias egrep='egrep --color' # show differences in colour
alias egrep='egrep --color' # show matched string in colour
alias fgrep='fgrep --color' # show differences in colour
alias fgrep='fgrep --color' # show matched string in colour
alias l='ls -l' # long list
alias l='ls -l' # long list
alias la='ls -A' # all but . and ..
alias la='ls -A' # all but . and ..
Line 190: Line 373:


alias ssha="ssh andlinux"
alias ssha="ssh andlinux"
alias sshn="ssh -t noekeon 'bash --rcfile ~/private/mip.bashrc'"
alias sshn="ssh -t noekeon"
alias sshg="ssh gryphon"
alias sshg="ssh gryphon"
alias sshnd="ssh -t noekeondirect 'bash --rcfile ~/private/mip.bashrc'"
alias sftpn="sftp daemenj@ftp.noekeon.org"
alias sftpn="sftp daemenj@ftp.noekeon.org"
#alias sshag="ssh-agent bash --rcfile ~/.basshrc" #Activate a ssh-agent shell


# function scpg - Copy file from/to gryphon
# function scpg - Copy file from/to gryphon
Line 249: Line 430:
########################
########################
# Set a default prompt of: user@host and current_directory
# Set a default prompt of: user@host and current_directory
PS1='\[\e]0;\w\a\]\n\[\e[01m\e[34m\]\u@\h \[\e[0m\e[33m\]\w\[\e[0m\]\n\$ '
PS1='\[\e]0;\w\a\]\n\[\e[0m\e[35m\]\u@\h \[\e[0m\e[33m\]\w\[\e[0m\]\n\$ '
export PS1
export PS1

</source>
</source>
}} }}

== ~/.dircolors.cfg ==
'''.dircolors.cfg'''
{{pl2|{{hiddenSourceFile|/home/beq06659/|.dircolors.cfg|<source lang=text class=".dircolors.cfg">

Download [{{#file: .dircolors.cfg}} this file].
<pre>
# Configuration file for dircolors, a utility to help you set the
# Configuration file for dircolors, a utility to help you set the
# LS_COLORS environment variable used by GNU ls with the --color option.
# LS_COLORS environment variable used by GNU ls with the --color option.
# Copyright (C) 1996, 1999-2008
# Free Software Foundation, Inc.
# Copying and distribution of this file, with or without modification,
# are permitted provided the copyright notice and this notice are preserved.
# The keywords COLOR, OPTIONS, and EIGHTBIT (honored by the
# The keywords COLOR, OPTIONS, and EIGHTBIT (honored by the
# slackware version of dircolors) are recognized but ignored.
# slackware version of dircolors) are recognized but ignored.
# Below, there should be one TERM entry for each termtype that is colorizable
# Below, there should be one TERM entry for each termtype that is colorizable
TERM linux
TERM Eterm
TERM linux-c
TERM ansi
TERM mach-color
TERM color-xterm
TERM console
TERM con132x25
TERM con132x25
TERM con132x30
TERM con132x30
Line 276: Line 459:
TERM con80x50
TERM con80x50
TERM con80x60
TERM con80x60
TERM cons25
TERM console
TERM cygwin
TERM cygwin
TERM dtterm
TERM dtterm
TERM eterm-color
TERM gnome
TERM gnome-256color
TERM konsole
TERM kterm
TERM linux
TERM linux-c
TERM mach-color
TERM mlterm
TERM mlterm
TERM putty
TERM putty
TERM xterm
TERM xterm-color
TERM xterm-debian
TERM rxvt
TERM rxvt
TERM rxvt-cygwin
TERM rxvt-cygwin-native
TERM rxvt-unicode
TERM rxvt-unicode
TERM screen
TERM screen
TERM screen-256color
TERM screen-bce
TERM screen-bce
TERM screen-w
TERM screen-w
TERM screen.linux
TERM vt100
TERM vt100
TERM Eterm
TERM xterm
TERM xterm-16color
TERM xterm-256color
TERM xterm-88color
TERM xterm-color
TERM xterm-debian
# Below are the color init strings for the basic file types. A color init
# Below are the color init strings for the basic file types. A color init
# string consists of one or more of the following numeric codes:
# string consists of one or more of the following numeric codes:
Line 308: Line 507:
BLK 40;33;01 # block device driver
BLK 40;33;01 # block device driver
CHR 40;33;01 # character device driver
CHR 40;33;01 # character device driver
ORPHAN 40;31;01 # symlink to nonexistent file
ORPHAN 40;31;01 # symlink to nonexistent file, or non-stat'able file
SETUID 37;41 # file that is setuid (u+s)
SETUID 37;41 # file that is setuid (u+s)
SETGID 30;43 # file that is setgid (g+s)
SETGID 30;43 # file that is setgid (g+s)
Line 315: Line 514:
STICKY 37;44 # dir with the sticky bit set (+t) and not other-writable
STICKY 37;44 # dir with the sticky bit set (+t) and not other-writable
# This is for files with execute permission:
# This is for files with execute permission:
EXEC 32
EXEC 32;04
# List any file extensions like '.gz' or '.tar' that you would like ls
# List any file extensions like '.gz' or '.tar' that you would like ls
# to colorize below. Put the extension, a space, and the color init string.
# to colorize below. Put the extension, a space, and the color init string.
# (and any comments you want to add after a '#')
# (and any comments you want to add after a '#')
# If you use DOS-style suffixes, you may want to uncomment the following:
# If you use DOS-style suffixes, you may want to uncomment the following:
#.cmd 32 # executables (bright green)
#.cmd 01;32 # executables (bright green)
#.exe 32
#.exe 01;32
#.com 32
#.com 01;32
#.btm 32
#.btm 01;32
#.bat 32
#.bat 01;32
# Or if you want to colorize scripts even if they do not have the
.tar 01;31 # archives or compressed (bright red)
# executable bit actually set.
#.sh 01;32
#.csh 01;32
# archives or compressed (bright red)
.tar 01;31
.tgz 01;31
.tgz 01;31
.svgz 01;31
.arj 01;31
.arj 01;31
.taz 01;31
.taz 01;31
.lzh 01;31
.lzh 01;31
.lzma 01;31
.zip 01;31
.zip 01;31
.z 01;31
.z 01;31
.Z 01;31
.Z 01;31
.dz 01;31
.gz 01;31
.gz 01;31
.bz2 01;31
.bz2 01;31
.bz 01;31
.tbz2 01;31
.tz 01;31
.deb 01;31
.deb 01;31
.rpm 01;31
.rpm 01;31
.jar 01;31
.jar 01;31
.rar 01;31
.ace 01;31
.zoo 01;31
.cpio 01;31
.7z 01;31
.rz 01;31
# image formats
# image formats
.jpg 35
.jpg 35
Line 352: Line 568:
.tiff 35
.tiff 35
.png 35
.png 35
.svg 35
.mng 35
.pcx 35
.mov 35
.mov 35
.mpg 35
.mpg 35
.mpeg 35
.mpeg 35
.m2v 35
.mkv 35
.ogm 35
.mp4 35
.m4v 35
.mp4v 35
.vob 35
.qt 35
.nuv 35
.wmv 35
.asf 35
.rm 35
.rmvb 35
.flc 35
.avi 35
.avi 35
.fli 35
.fli 35
Line 361: Line 594:
.xcf 35
.xcf 35
.xwd 35
.xwd 35
.yuv 35
# audio formats
# audio formats
.aac 00;36
.flac 35
.au 00;36
.mp3 35
.flac 00;36
.mpc 35
.mid 00;36
.ogg 35
.midi 00;36
.wav 35
.mka 00;36
</pre>
.mp3 00;36
.mpc 00;36
.ogg 00;36
.ra 00;36
.wav 00;36
</source>
}} }}
'''.inputrc'''
{{pl2|{{hiddenSourceFile|/home/beq06659/|.inputrc|<source lang=bash class=".inputrc">
#
# MIP CUSTOM BINDING STARTS HERE
#


# Allow 8-bit input/output (for Cygwin)
=== ~/.ssh/config-home ===
set meta-flag on
Download [{{#file: config-nxp}} this file].
set convert-meta off
<pre>
set input-meta on
set output-meta on
$if Bash
# Don't ring bell on completion
#set bell-style none

# or, don't beep at me - show me
#set bell-style visible

#
# If set to on, words which have more than one possible completion without
# any possible partial completion cause the matches to be listed immediately
# instead of ringing the bell.
#
set show-all-if-unmodified on

#
# If set to on, words which have more than one possible completion cause the
# matches to be listed immediately instead of ringing the bell.
#
set show-all-if-ambiguous on

# Expand homedir name
#set expand-tilde on

# Append "/" to all dirnames
#set mark-directories on
#set mark-symlinked-directories on

# Match all files
#set match-hidden-files on

# 'Magic Space'
# Insert a space character then performs
# a history expansion in the line
Space: magic-space
$endif

"\eOA":history-search-backward #Up arrow
"\e[A":history-search-backward #Up arrow
"\eOB":history-search-forward #Down arrow
"\e[B":history-search-forward #Down arrow
"\C- ":dynamic-complete-history #Ctrl-space
"\e ":dynamic-complete-history #Esc-space
</source>
}} }}
'''.profile'''
{{pl2|{{hiddenSourceFile|/home/beq06659/|.profile|<source lang=bash class=".profile">
# ~/.profile: executed by the command interpreter for login shells.
# This file is not read by bash(1), if ~/.bash_profile or ~/.bash_login
# exists.
# see /usr/share/doc/bash/examples/startup-files for examples.
# the files are located in the bash-doc package.

# the default umask is set in /etc/profile; for setting the umask
# for ssh logins, install and configure the libpam-umask package.
#umask 022

# if running bash
if [ -n "$BASH_VERSION" ]; then
# include .bashrc if it exists
if [ -f "$HOME/.bashrc" ]; then
. "$HOME/.bashrc"
fi
fi

# set PATH so it includes user's private bin if it exists
if [ -d "$HOME/bin" ] ; then
PATH="$HOME/bin:$PATH"
fi

# SSH settings
##############
eval `ssh-agent-refresh.sh` >/dev/null

</source>
}} }}
'''.vimrc'''
{{pl2|{{hiddenSourceFile|/home/beq06659/|.vimrc|<source lang=text class=".vimrc">
syntax enable
set bg=light
set number
set bs=2
nnoremap j h
nnoremap k j
nnoremap l k
nnoremap m l
nnoremap h m
vnoremap j h
vnoremap k j
vnoremap l k
vnoremap m l
vnoremap h m
set tabstop=4 softtabstop=4 shiftwidth=4 noexpandtab
set autoindent
"set smartindent
"set cindent
"set cinkeys=0{,0},:,0#,!,!^F

inoremap <expr> <C-L> pumvisible() \|\| &omnifunc == '' ?
\ "\<lt>C-n>" :
\ "\<lt>C-x>\<lt>C-o><c-r>=pumvisible() ?" .
\ "\"\\<lt>c-n>\\<lt>c-p>\\<lt>c-n>\" :" .
\ "\" \\<lt>bs>\\<lt>C-n>\"\<CR>"

"Press Ctrl-Space instead of ESC (because Shift-Space only work in GUI).
"See http://vim.wikia.com/wiki/Avoid_the_escape_key
"- nnoremap causes Ctrl-Space to cancel any prefix keys
nnoremap <nul> <Esc>
"- vnoremap causes Ctrl-Space to cancel any selection (gV is required to prevent automatic reselection)
vnoremap <nul> <Esc>gV
"- onoremap causes Ctrl-Space to cancel any operator pending commands (like y)
onoremap <nul> <Esc>
"- inoremap causes Ctrl-Space to exit insert mode and `^ restore cursor position (cursor does not move left)
inoremap <nul> <Esc>`^

" function! CleverTab()
" if pumvisible()
" return "\<C-N>"
" endif
" let line=strpart( getline('.'), 0, col('.')-1 )
" if !(line =~ '^.*[a-zA-Z0-1_]$') "completion only if last char is a word char
" return "\<Tab>"
" elseif exists('&omnifunc') && &omnifunc != ''
" return "\<C-X>\<C-O>"
" else
" return "\<C-N>"
" endif
" endfunction
" inoremap <expr> <Tab> CleverTab()
</source>
}} }}
=== Directory /home/beq06659/.ssh ===
'''config-home'''
{{pl2|{{hiddenSourceFile|/home/beq06659/.ssh/|config-home|<source lang=text class="config-home">
# ~/.ssh/config-home
# ~/.ssh/config-home


Host ftp.noekeon.org noekeon
Host ftp.noekeon.org noekeon
User daemenj
User daemenj
HostName ftp.noekeon.org
HostName ftp.noekeon.org
ProxyCommand none


Host noekeonsshtunnel
Host andlinux
User daemenj
User beq06659
HostName ftp.noekeon.org
HostName andlinux
ProxyCommand /usr/local/bin/ssh-tunnel.pl -q -f - - %h %p
ProxyCommand none

Host gryphon
User baddreams
HostName gryphon
ProxyCommand none


Host gryphon gryphon
Host leviathan
User mich
User baddreams
HostName gryphon
HostName leviathan
ProxyCommand none


Host *
Host *
ProxyCommand none
ServerAliveInterval 15
ServerAliveInterval 15
</pre>


</source>
=== ~/.ssh/config-nxp ===
}} }}
Download [{{#file: config-nxp}} this file].
'''config-nxp'''
<pre>
{{pl2|{{hiddenSourceFile|/home/beq06659/.ssh/|config-nxp|<source lang=text class="config-nxp">
# ~/.ssh/config-nxp
# ~/.ssh/config-nxp


Host ftp.noekeon.org noekeon
Host ftp.noekeon.org noekeon
User daemenj
User daemenj
HostName ftp.noekeon.org
HostName ftp.noekeon.org
ProxyCommand /usr/local/bin/ssh-tunnel.pl -q -f - - %h %p
#TEST-To prevent disconnect if network down...
TCPKeepAlive no
# ProxyCommand /usr/local/bin/ssh-tunnel.pl -f - - %h %p
Proxycommand /bin/bash -c 'exec 3<>/dev/tcp/emea.nics.nxp.com/8080;echo -n -e "CONNECT %h:%p HTTP/1.0\r\n\r\n" >&3; read -n 39 <&3; echo -n -e "SSH-2.0-OpenSSH_5.1\r\n" >&3; head -c 50 <&3; read -n 21; exec /usr/local/bin/multitee 0:3 3:1'
###### EXPERIMENTS:
# Proxycommand /bin/bash -c 'exec 3<>/dev/tcp/emea.nics.nxp.com/8080;echo -n -e "CONNECT %h:%p HTTP/1.0\r\n\r\n" >&3; read -n 39 <&3; cat ~/.ssh/clbanner.txt >&3; head -c 50 <&3; read -n $(stat -c %%s ~/.ssh/clbanner.txt); exec /usr/local/bin/socat - FD:3'

Host noekeonsshtunnel
User daemenj
HostName ftp.noekeon.org
ProxyCommand /usr/local/bin/ssh-tunnel.pl -q -f - - %h %p


Host andlinux
Host andlinux
User beq06659
User beq06659
HostName andlinux
HostName andlinux
ProxyCommand none
ProxyCommand none


Host gryphon
Host gryphon
User baddreams
User baddreams
HostName gryphon
HostName gryphon
ProxyCommand none

Host leviathan
User mich
HostName leviathan
ProxyCommand none


Host *
Host *
# ProxyCommand /usr/local/bin/ssh-tunnel.pl - - %h %p
ProxyCommand /usr/local/bin/ssh-tunnel.pl -q - - %h %p
ServerAliveInterval 15
Proxycommand /bin/bash -c 'exec 3<>/dev/tcp/emea.nics.nxp.com/8080;echo -n -e "CONNECT %h:%p HTTP/1.0\r\n\r\n" >&3; read -n 39 <&3; echo -n -e "SSH-2.0-OpenSSH_5.1\r\n" >&3; head -c 50 <&3; read -n 21; exec /usr/local/bin/socat - FD:3'
ServerAliveInterval 15
</pre>


</source>
=== ~/.ssh/config-tunnel ===
}} }}
Download [{{#file: config-nxp}} this file].
'''config-nxp_auth''' - symlinked to <tt>config-nxp</tt>
<pre>
# ~/.ssh/config-tunnel


'''config-nxp_direct''' - symlinked to <tt>config-nxp</tt>
Host ftp.noekeon.org noekeon
User daemenj
HostName ftp.noekeon.org
ProxyCommand /usr/local/bin/ssh-tunnel.pl -q -f - - %h %p


'''proxy.conf-default'''
Host noekeonsshtunnel
{{pl2|{{hiddenSourceFile|/home/beq06659/.ssh/|proxy.conf-default|<source lang=text class="proxy.conf-default">
User daemenj
# SSH Tunnel configuration file.
HostName ftp.noekeon.org
ProxyCommand /usr/local/bin/ssh-tunnel.pl -q -f - - %h %p


# Section: OPTIONS
Host andlinux
[option-section]
User beq06659
debug=0
HostName andlinux
dry=0
ProxyCommand none
icmp=0
sshping=1
timeout=1


# Section: PROXY
Host gryphon gryphon
[proxy2-section]
User baddreams
HostName gryphon


#=== Philips gateway & proxy ========
Host *
130.145.67/24 proxy.adc-itcl.ce.philips.com:8080 -C ~/.ssh/clbanner.txt
ProxyCommand /usr/local/bin/ssh-tunnel.pl -q - - %h %p

ServerAliveInterval 15
#=== NXP Proxy - on DELL/WinXP ======================
</pre>
#proxy is a synonym - but not portable because it might only work at Leuven...
134.27.180/22 emea.nics.nxp.com:8080 -C ~/.ssh/clbanner.txt

#=== NXP Proxy - Caen - on DELL/WinXP ======================
134.27.248/21 emea.nics.nxp.com:8080 -C ~/.ssh/clbanner.txt -u=beq06659 -p=oiuOIUoiuOIUoiu9

#=== NXP Proxy - on DELL/AndLinux ======================
#proxy is a synonym - but not portable because it might only work at Leuven...
10.0.2.2/32 emea.nics.nxp.com:8080 -C ~/.ssh/clbanner.txt

</source>
}} }}
'''proxy.conf-home''' - symlinked to <tt>proxy.conf-default</tt>

'''proxy.conf-nxp''' - symlinked to <tt>proxy.conf-default</tt>


=== ~/.ssh/proxy.conf ===
'''proxy.conf-nxp_auth'''
{{pl2|{{hiddenSourceFile|/home/beq06659/.ssh/|proxy.conf-nxp_auth|<source lang=text class="proxy.conf-nxp_auth">
Download [{{#file: proxy.conf}} this file].
<pre>
# SSH Tunnel configuration file.
# SSH Tunnel configuration file.


Line 476: Line 870:
#=== NXP Proxy - on DELL/WinXP ======================
#=== NXP Proxy - on DELL/WinXP ======================
#proxy is a synonym - but not portable because it might only work at Leuven...
#proxy is a synonym - but not portable because it might only work at Leuven...
#134.27.180/22 proxy:8080 -C ~/.ssh/clbanner.txt
134.27.180/22 emea.nics.nxp.com:8080 -C ~/.ssh/clbanner.txt
134.27.180/22 emea.nics.nxp.com:8080 -C ~/.ssh/clbanner.txt

#=== NXP Proxy - Caen - on DELL/WinXP ======================
134.27.248/21 emea.nics.nxp.com:8080 -C ~/.ssh/clbanner.txt -u=beq06659 -p=****************


#=== NXP Proxy - on DELL/AndLinux ======================
#=== NXP Proxy - on DELL/AndLinux ======================
#proxy is a synonym - but not portable because it might only work at Leuven...
#proxy is a synonym - but not portable because it might only work at Leuven...
#10.0.2.2/32 proxy:8080 -C ~/.ssh/clbanner.txt
10.0.2.2/32 emea.nics.nxp.com:8080 -C ~/.ssh/clbanner.txt -u=beq06659 -p=****************
10.0.2.2/32 emea.nics.nxp.com:8080 -C ~/.ssh/clbanner.txt
</pre>


</source>
== ~/.vimrc ==
}} }}
'''config-home-nxp_direct''' - symlinked to <tt>config-default</tt>

=== Directory /home/beq06659/bin ===
'''backup_main''' - This file must be '''chmod 700'''.
{{pl2|{{hiddenSourceFile|/home/beq06659/bin/|backup_main|<source lang=bash class="backup_main">
#! /bin/bash

# This script will create a backup of the miki wiki database on noekeon.org

# Helper functions
#
# These functions assume that the following env. variables are defined:
#
# THISDAY
# THISWEEK
# THISMONTH
# THISYEAR
# NEXTDAILY
# NEXTWEEKLY
# NEXTMONTHLY
# NEXTYEARLY
# BACKUPPREFIX
# BACKUPID
# BACKUPEXT
# BACKUPCMD
# BACKUPDIR

if [ -n "$1" ]; then
BACKUP_DEF_FILE=$1
else
echo "Usage: $0 backup-definition-file"
echo
echo "Format of backup-definition-file: one or more entry as follows, separated by empty lines."
echo
echo " BACKUPPREFIX=prefix_of_all_backup_files_for_this_entry"
echo " BACKUPID=some_id_used_to_generate_backup_file_name"
echo " BACKUPEXT=sql.gz"
echo " BACKUPCMD=\"... some command generating the backup data to standard output ... \""
exit 1
fi

if [ "$2" == "--force" ]; then
FORCE_DAILY=1
fi

function makeweekly()
{
local FNAMENEW=${FNAMEBASE}.weekly.${BACKUPEXT}
echo "Creating backup file '${FNAMENEW}'..."
cp $FNAMEDAILY ${FNAMENEW}
NEXTWEEKLY=$((THISWEEK+1)) # This will overflow but 201001 > 200954 so it's ok
}

function makemonthly()
{
local FNAMENEW=${FNAMEBASE}.monthly.${BACKUPEXT}
echo "Creating backup file '${FNAMENEW}'..."
cp $FNAMEDAILY ${FNAMENEW}
NEXTMONTHLY=$((THISMONTH+1)) # This will overflow but 201001 > 200913 so it's ok
}

function makeyearly()
{
local FNAMENEW=${FNAMEBASE}.yearly.${BACKUPEXT}
echo "Creating backup file '${FNAMENEW}'..."
cp $FNAMEDAILY ${FNAMENEW}
NEXTYEARLY=$((THISYEAR+1))
}

function rmoldest()
{
local SUFFIX=$1
local NBR=$2

#Count files
file_count=$(ls ${BACKUPDIR}/*${SUFFIX}| wc -l)

#Delete files while we have more than $NBR
while [ $file_count -gt $NBR ]
do
#Delete alphabetically oldest file (ls sort by name is default)
rm $(ls ${BACKUPDIR}/*${SUFFIX} | head -n 1)
#Count files again
file_count=$(ls ${BACKUPDIR}/*${SUFFIX}| wc -l)
done
}

function create-backups()
{
# Some environment variables
BACKUPDIR=~/backup
BACKUPRC=~/.backup-${BACKUPID}.${BACKUPEXT}.rc
THISDAY=$(date '+%Y%j')
THISWEEK=$(date '+%Y%V')
THISMONTH=$(date '+%Y%m')
THISYEAR=$(date '+%Y')

#========================================================
# Read resource file
#========================================================
if [ -a $BACKUPRC ]
then
# ! HOMEDIR must be chmod 755 at most, and $BACKUPRC chmod 644 at most
. $BACKUPRC
else
# Resource file doesn't exist, let's use default value
NEXTDAILY=$THISDAY # Next daily is this day by default
NEXTWEEKLY=$THISWEEK # Next weekly is this week by default
NEXTMONTHLY=$THISMONTH # Next monthly is this month by default
NEXTYEARLY=$THISYEAR # Next yearly is this year by default
fi

#We exit immediately if script was already run today...
[ $THISDAY -ge $NEXTDAILY -o -n "$FORCE_DAILY" ] || return 0

#========================================================
# DAILY backup
#========================================================
echo "Creating backup for:"
echo " BACKUPPREFIX=$BACKUPPREFIX"
echo " BACKUPID=$BACKUPID"
echo " BACKUPEXT=$BACKUPEXT"
echo " BACKUPCMD=$BACKUPCMD"

# Some environment variables
FNAMEBASE=${BACKUPDIR}/${BACKUPPREFIX}-$(date '+%Y%m%d')-${BACKUPID}
FNAMEDAILY=${FNAMEBASE}.daily.${BACKUPEXT}
#First we need to restore the ssh-agent context, if any
eval $(/usr/local/bin/ssh-agent-refresh.sh) > /dev/null
#Create backup parent directory
mkdir -p $BACKUPDIR
#We create the daily backup file
echo "Creating the daily backup file '$FNAMEDAILY'..."
eval $BACKUPCMD > "$FNAMEDAILY"
if ! [ $? -eq 0 -a -s "$FNAMEDAILY" ]; then
echo "... Backup failed! Exiting..."
rm "$FNAMEDAILY"
return 1
fi
NEXTDAILY=$((THISDAY+1)) # This will overflow but 2010001 > 2009367 so it's ok
#========================================================
# WEEKLY / MONTHLY / YEARLY backups
#========================================================
#Now, depending on current date, we'll create weekly, monthly or yearly backups...
[ $THISWEEK -ge $NEXTWEEKLY ] && makeweekly
[ $THISMONTH -ge $NEXTMONTHLY ] && makemonthly
[ $THISYEAR -ge $NEXTYEARLY ] && makeyearly
#Now let's delete the oldest backups
rmoldest "-${BACKUPID}.daily.${BACKUPEXT}" "3"
rmoldest "-${BACKUPID}.weekly.${BACKUPEXT}" "3"
rmoldest "-${BACKUPID}.monthly.${BACKUPEXT}" "3"
rmoldest "-${BACKUPID}.yearly.${BACKUPEXT}" "3"
#Finally we update our resource file
umask 022
echo "NEXTDAILY=${NEXTDAILY}" >$BACKUPRC
echo "NEXTWEEKLY=${NEXTWEEKLY}" >>$BACKUPRC
echo "NEXTMONTHLY=${NEXTMONTHLY}" >>$BACKUPRC
echo "NEXTYEARLY=${NEXTYEARLY}" >>$BACKUPRC
}

#Creates the backup for each entry in the backup definition file
while read -u 3 LINE; do
if [ -z "$LINE" ]; then
BACKUPPREFIX=
BACKUPID=
BACKUPEXT=
BACKUPCMD=
else
eval $LINE
[ -n "$BACKUPPREFIX" ] && [ -n "$BACKUPID" ] && [ -n "$BACKUPEXT" ] && [ -n "$BACKUPCMD" ] && create-backups
fi
done 3< $BACKUP_DEF_FILE

</source>
}} }}
'''generate_wiki_config_file_page.sh''' - This file must be '''chmod 700'''.
{{pl2|{{hiddenSourceFile|/home/beq06659/bin/|generate_wiki_config_file_page.sh|<source lang=bash class="generate_wiki_config_file_page.sh">
#! /bin/bash

function wikify_directory()
{
DIRECTORY="$1"
cd $DIRECTORY
echo "=== Directory $DIRECTORY ==="
}

function wikify_config_stdin()
{
local FILE="$1"
local TAGTYPE=source
local LANG="$2"
local DESCRIPTION="$3"
if [ -n "$DESCRIPTION" ]; then
echo -e "'''$FILE''' - $DESCRIPTION"
else
echo "'''$FILE'''"
fi
if [ -n "$LANG" ]; then
echo "{{pl2|{{hiddenSourceFile|$DIRECTORY/|$FILE|<$TAGTYPE lang="$LANG" class=\"$FILE\">"
else
echo "{{pl2|{{hiddenSourceFile|$DIRECTORY/|$FILE|<$TAGTYPE class=\"$FILE\">"
fi
cat
echo "</$TAGTYPE>"
echo "}} }}"
}

function wikify_config_file()
{
cat $DIRECTORY/"$1" | wikify_config_stdin "$1" "$2" "$3"
}

echo "== AndLinux files =="
#echo "<small>Last generated on '''$(date)''' with script '''$0''' on host '''$HOSTNAME'''</small>"
echo "<small>Generated with script '''$0''' on host '''$HOSTNAME'''</small>"
echo

wikify_directory /etc
wikify_config_file fstab text



wikify_directory /etc/privoxy
wikify_config_file set-network-config bash "This file must be '''chmod 755'''. Also the following line must be added to <tt>/etc/sudoers</tt>:
:<code> ALL ALL=(ALL) NOPASSWD: /etc/privoxy/set-network-config </code>"
diff -u config.original config-home | wikify_config_stdin config-home.patch diff
diff -u config-home config-nxp | wikify_config_stdin config-nxp.patch diff
echo "'''config-nxp_auth''' - symlinked to <tt>config-nxp</tt>"
echo
diff -u config-nxp config-nxp_direct | wikify_config_stdin config-nxp_direct.patch diff



wikify_directory /usr/local/bin
wikify_config_file be bash "This script would ideally require to add the following line to <tt>/etc/sudoers</tt>:
:<code>ALL ALL=(ALL) NOPASSWD: /bin/loadkeys</code>"
wikify_config_file ssh-agent-refresh.sh bash



wikify_directory ~
wikify_config_file .bashrc bash "Everything before <tt>#### CUSTOMIZATION</tt> is the original file."
wikify_config_file .dircolors.cfg text
wikify_config_file .inputrc bash
wikify_config_file .profile bash
wikify_config_file .vimrc text



wikify_directory ~/.ssh
wikify_config_file config-home text
wikify_config_file config-nxp text
echo "'''config-nxp_auth''' - symlinked to <tt>config-nxp</tt>"
echo
echo "'''config-nxp_direct''' - symlinked to <tt>config-nxp</tt>"
echo
wikify_config_file proxy.conf-default text
echo "'''proxy.conf-home''' - symlinked to <tt>proxy.conf-default</tt>"
echo
echo "'''proxy.conf-nxp''' - symlinked to <tt>proxy.conf-default</tt>"
echo
wikify_config_file proxy.conf-nxp_auth text
echo "'''config-home-nxp_direct''' - symlinked to <tt>config-default</tt>"
echo


wikify_directory ~/bin
wikify_config_file backup_main bash "This file must be '''chmod 700'''."
wikify_config_file generate_wiki_config_file_page.sh bash "This file must be '''chmod 700'''."
wikify_config_file restore_wiki.sh bash "This file must be '''chmod 700'''."
wikify_config_file set-network.sh bash "This file must be '''chmod 700'''."
wikify_config_file sshproxy bash "This file must be '''chmod 700'''."
wikify_config_file startup.sh bash "This file must be '''chmod 700'''."


wikify_directory ~/etc
wikify_config_file backup_definition text
wikify_config_file crontab bash "Install this file with
:<code>crontab -u beq06659 ~/etc/crontab</code>"
</source>
}} }}
'''restore_wiki.sh''' - This file must be '''chmod 700'''.
{{pl2|{{hiddenSourceFile|/home/beq06659/bin/|restore_wiki.sh|<source lang=bash class="restore_wiki.sh">
#! /bin/bash


function restore_wiki()
{
WIKI_DIR=$1

#
# Restore the wiki backup locally - miki
#
HTML_ROOT=/data/www
SQL_BACKUP=$(ls ~/backup/*-www.noekeon.org_$WIKI_DIR.daily.sql.gz | tail -n 1)
TAR_BACKUP=$(ls ~/backup/*-www.noekeon.org_$WIKI_DIR.daily.tar.gz | tail -n 1)
WIKI_SETTINGS_FNAME="$HTML_ROOT/$WIKI_DIR/LocalSettings.php"

[ -a "$SQL_BACKUP" ] || return 1
[ -a "$TAR_BACKUP" ] || return 1

echo "Restoring TAR backup $TAR_BACKUP..."
echo
sudo rm -r "$HTML_ROOT/$WIKI_DIR"
cd "$HTML_ROOT"
sudo tar -xvzf "$TAR_BACKUP" >/dev/null

sudo chown $USER "$HTML_ROOT/$WIKI_DIR"
sudo chown $USER $WIKI_SETTINGS_FNAME
sed -i -r 's/(wgDBserver.*").*(")/\1localhost\2/' $WIKI_SETTINGS_FNAME

wgDBname=$(<"$WIKI_SETTINGS_FNAME" perl -lne 'print for /wgDBname.*"(.*)"/')
wgDBuser=$(<"$WIKI_SETTINGS_FNAME" perl -lne 'print for /wgDBuser.*"(.*)"/')
wgDBpassword=$(<"$WIKI_SETTINGS_FNAME" perl -lne 'print for /wgDBpassword.*"(.*)"/')

echo "Restoring SQL backup $SQL_BACKUP..."
echo
gunzip < "$SQL_BACKUP" | mysql -u "$wgDBuser" -p"$wgDBpassword" "$wgDBname"

sudo chown -R www-data "$WIKI_DIR"
sudo chgrp -R www-data "$WIKI_DIR"
}

restore_wiki miki
restore_wiki crypto

</source>
}} }}
'''set-network.sh''' - This file must be '''chmod 700'''.
{{pl2|{{hiddenSourceFile|/home/beq06659/bin/|set-network.sh|<source lang=bash class="set-network.sh">
#! /bin/bash

# Exit if no network name given or if no corresponding configuration file
NETWORK=$1
[ -n "$NETWORK" ] || exit 1

# Some logging...
echo -e "\t[$HOSTNAME] Running $(basename $0) '$NETWORK'..." 1>&2

# Checked all needed files are present...
SSH_CONFIG_FILE=~/".ssh/config-$NETWORK"
if ! [ -a $SSH_CONFIG_FILE -a -a /etc/privoxy/config-$NETWORK ]; then
echo "ERROR! I don't know how to reconfigure network '$NETWORK'" 1>&2
exit 255
fi

#First we need to restore the ssh-agent context, if any
eval $(/usr/local/bin/ssh-agent-refresh.sh) > /dev/null

# Now let's reconfigure as needed...
if [ $NETWORK = "nxp_auth" ]; then
echo -e "\t!!! UPDATE PASSWORD AT ~/.ssh/proxy.conf AND RE-RUN THIS COMMAND !!!"
fi

~/bin/sshproxy stop
sleep 1
ln -sf $SSH_CONFIG_FILE ~/.ssh/config
sudo /etc/privoxy/set-network-config "$NETWORK"
~/bin/sshproxy start
</source>
}} }}
'''sshproxy''' - This file must be '''chmod 700'''.
{{pl2|{{hiddenSourceFile|/home/beq06659/bin/|sshproxy|<source lang=bash class="sshproxy">
#! /bin/sh
#
# sshproxy Setup ssh port forwarding (imap) and SOCKS 5 proxy
# ssh connection is made persistent thanks to autossh
#
# Author: Michaël Peeters
#
# Prerequisite: ssh-agent must be running in background (autossh won't ask for password)
#
# chkconfig: 235 70 40
# description: sshproxy startup script.

SUBSYS=sshproxy
TARGET=/usr/bin/autossh
BINDADDRESS=0.0.0.0 #0.0.0.0 external connection allowed; 127.0.0.1 only connection from localhost allowed

# Source function library.
#. /etc/rc.d/init.d/functions

# Some macros to make the below more readable
#PID_FILE=/var/run/$SUBSYS.pid
#LOCK_FILE=/var/lock/subsys/$SUBSYS
PID_FILE=~/.$SUBSYS.pid
LOCK_FILE=~/.$SUBSYS.lock

echo_success()
{
echo "\t\t[OK ]"
}

echo_failure()
{
echo "\t\t[FAILED]"
}


start()
{
echo -n "Starting $SUBSYS:"

if [ -f $LOCK_FILE ]; then
RETVAL=1
else
export AUTOSSH_PIDFILE=$PID_FILE
export AUTOSSH_POLL=300
/usr/bin/autossh -M 0 -f -N -n -q -L ${BINDADDRESS}:9025:smtp.priorweb.be:25 -L ${BINDADDRESS}:9143:mail.priorweb.be:143 -L ${BINDADDRESS}:9026:mail.altranweb.be:25 -L ${BINDADDRESS}:9144:mail.altranweb.be:143 -D ${BINDADDRESS}:1080 noekeon
RETVAL=$?
fi

if [ $RETVAL -eq 0 ]; then
touch $LOCK_FILE
echo_success
else
echo_failure
fi
}

stop()
{
# don't delete lock file while pid file not deleted
# don't delete pidfile while process is running

echo -n "Stopping $SUBSYS:"

status
case "$RETVAL" in
0)
( kill -TERM $pid || kill -KILL $pid ) >/dev/null
RETVAL=$?
;;
1) RETVAL=0;;
2) RETVAL=0;;
*) ;;
esac

if [ $RETVAL -eq 0 ]; then
rm -f $LOCK_FILE
rm -f $PID_FILE
echo_success
else
echo_failure
fi
}

status()
{
# no lockfile --> (3) Not started.
# lockfile present, no pidfile --> (2) Started, but terminated
# lockfile & pidfile present, no process --> (1) Started, but killed
# lockfile, pidfile & process present --> (0) Started.
# -- note this is opposite order compared to status function, but support multiple autossh running concurrently

unset pid
read pid 2>/dev/null < $PID_FILE

if [ ! -f $LOCK_FILE ]; then
# /var/lock/subsys/$SUBSYS doesn't exist
RETVAL=3
elif [ "$pid" = "" ] ; then
# lock file exists, but file "/var/run/*.pid" doesn't exist
RETVAL=2
elif ( ! ps -p $pid | grep -q $pid ) ; then
# Both files exist but process is not running anymore...
RETVAL=1
else
# Everything is fine
RETVAL=0
fi
}

reload()
{
read pid 2>/dev/null < $PID_FILE
kill -HUP $pid
RETVAL=$?
}

# See how we were called.
case "$1" in
start)
start
;;
stop)
stop
;;
status)
status
case "$RETVAL" in
0)
echo -n "$SUBSYS (pid $pid) is running"
if ( ps -fu $USER | grep -q " $pid .*/ssh " ) ; then echo " and connection is alive..."; else echo " but connection is dead..."; fi
;;
1)
echo "$SUBSYS dead but pid file exists"
;;
2)
echo "$SUBSYS dead but subsys locked..."
;;
3)
echo "$SUBSYS is stopped"
;;
esac
;;
reload)
reload
;;
restart)
stop
start
;;
*)
echo "Usage: $0 {start|stop|status|reload|restart}"
RETVAL=1
esac

exit $RETVAL

</source>
}} }}
'''startup.sh''' - This file must be '''chmod 700'''.
{{pl2|{{hiddenSourceFile|/home/beq06659/bin/|startup.sh|<source lang=bash class="startup.sh">
#! /bin/bash

# Start ssh-agent and add key
##############################
eval `ssh-agent-refresh.sh` >/dev/null
if ( ! ( ssh-add -L | grep -q $USER ) ); then ssh-add; fi

# Start ssh-proxy - USELESS - ALWAYS FOLLOWED BY A CALL TO ~/bin/network-* which restarts sshproxy anyway
##############################
#~/bin/sshproxy stop >/dev/null
#~/bin/sshproxy start

</source>
}} }}
=== Directory /home/beq06659/etc ===
'''backup_definition'''
{{pl2|{{hiddenSourceFile|/home/beq06659/etc/|backup_definition|<source lang=text class="backup_definition">
BACKUPPREFIX=wiki
BACKUPID=www.noekeon.org_miki
BACKUPEXT=sql.gz
BACKUPCMD="ssh noekeon '~daemenj/private/backup_wiki ~daemenj/kiwi.noekeon.org/miki/LocalSettings.php'"

BACKUPPREFIX=wiki
BACKUPID=www.noekeon.org_miki
BACKUPEXT=tar.gz
BACKUPCMD="ssh noekeon 'cd ~daemenj/kiwi.noekeon.org; /usr/bin/nice -n 19 tar -cz miki/'"

BACKUPPREFIX=wiki
BACKUPID=www.noekeon.org_crypto
BACKUPEXT=sql.gz
BACKUPCMD="ssh noekeon '~daemenj/private/backup_wiki ~daemenj/kiwi.noekeon.org/crypto/LocalSettings.php'"

BACKUPPREFIX=wiki
BACKUPID=www.noekeon.org_crypto
BACKUPEXT=tar.gz
BACKUPCMD="ssh noekeon 'cd ~daemenj/kiwi.noekeon.org; /usr/bin/nice -n 19 tar -cz crypto/'"
</source>
}} }}
'''crontab''' - Install this file with
:<code>crontab -u beq06659 ~/etc/crontab</code>
{{pl2|{{hiddenSourceFile|/home/beq06659/etc/|crontab|<source lang=bash class="crontab">
# Crontab for user beq06659
#
# Install this crontab with
#
# crontab -u beq06659 crontab
#
# Use /bin/bash to run commands, instead of the default /bin/sh
SHELL=/bin/bash
# Define variable USER because we need it in our job scripts
USER=beq06659
# Mail any output to 'beq06659', no matter whose crontab this is
MAILTO=beq06659
#
#
# m h dom mon dow command (dow=0|7 is sunday)
37 * * * * ~beq06659/bin/backup_main ~beq06659/etc/backup_definition


Download [{{#file: .vimrc}} this file].
<source lang="bash">
syntax enable
set bg=light
set number
set bs=2
nnoremap j h
nnoremap k j
nnoremap l k
nnoremap m l
nnoremap h m
vnoremap j h
vnoremap k j
vnoremap l k
vnoremap m l
vnoremap h m
set tabstop=4 softtabstop=4 shiftwidth=4 noexpandtab
set autoindent
</source>
</source>
}} }}

Latest revision as of 11:21, 26 April 2013

These are the configuration files on Configuration NXP Dell Latitude D620 - AndLinux.

Windows Host files

settings.txt

hosts

AndLinux files

Generated with script /home/beq06659/bin/generate_wiki_config_file_page.sh on host andLinux

Directory /etc

fstab

Directory /etc/privoxy

set-network-config - This file must be chmod 755. Also the following line must be added to /etc/sudoers:

ALL ALL=(ALL) NOPASSWD: /etc/privoxy/set-network-config

config-home.patch

config-nxp.patch

config-nxp_auth - symlinked to config-nxp

config-nxp_direct.patch

Directory /usr/local/bin

be - This script would ideally require to add the following line to /etc/sudoers:

ALL ALL=(ALL) NOPASSWD: /bin/loadkeys

ssh-agent-refresh.sh

Directory /home/beq06659

.bashrc - Everything before #### CUSTOMIZATION is the original file.

.dircolors.cfg

.inputrc

.profile

.vimrc

Directory /home/beq06659/.ssh

config-home

config-nxp

config-nxp_auth - symlinked to config-nxp

config-nxp_direct - symlinked to config-nxp

proxy.conf-default

proxy.conf-home - symlinked to proxy.conf-default

proxy.conf-nxp - symlinked to proxy.conf-default

proxy.conf-nxp_auth

config-home-nxp_direct - symlinked to config-default

Directory /home/beq06659/bin

backup_main - This file must be chmod 700.

generate_wiki_config_file_page.sh - This file must be chmod 700.

restore_wiki.sh - This file must be chmod 700.

set-network.sh - This file must be chmod 700.

sshproxy - This file must be chmod 700.

startup.sh - This file must be chmod 700.

Directory /home/beq06659/etc

backup_definition

crontab - Install this file with

crontab -u beq06659 ~/etc/crontab
Retrieved from "https://miki.immie.org/mediawiki/index.php?title=Nxl67002_-_AndLinux_-_Files&oldid=4591"