Linux Disk Management: Difference between revisions

From miki
Jump to navigation Jump to search
Line 1: Line 1:
== References ==
== Related pages ==
* [[Grub]]
* [[Grub]]
* See pages dedicated to [[Linux NTFS|NTFS]] and [[Samba]]
* [[Linux NTFS|NTFS]]
* [[NFS]]
* [[Samba]]


== Partitions ==
== Partitions ==

Revision as of 10:02, 17 January 2011

Related pages

Partitions

Some GUI software:

  • gparted

Some CLI software:

  • fdisk
  • sfdisk
  • parted

Some examples:

$ sudo fdisk -l /dev/sda                            # Show partition table for device /dev/sda
$ sudo fdisk -l -u /dev/sda                         # ... using sector as unit
$ sudo parted -l                                    # Show partition table of all devices
$ sudo parted /dev/sda print                        # ... of only device /dev/sda
$ sudo parted /dev/sda unit cyl print               #     ... using cylinder as unit
$ sudo parted /dev/sda unit s print                 #     ... using sector as unit (more accurate)
$ sudo sfdisk -l -uS /dev/sda                       # Show partition table for device /dev/sda
$ sudo sfdisk -d /dev/sda >sda-sfdisk.dump          # Dump partition in a format that can be understood by sfdisk
$ sudo sfdisk /dev/sda <sda-sfdisk.dump             # Restore a dumped partition table
$ sudo dd if=/dev/sda of=sda.mbr bs=512 count=1     # Save the complete MBR (table + boot code)

Use partprobe to force the kernel to re-read the MBR (re-read the partition table, see [1]). Or alternatively one can use fdisk to re-rewrite the same partition and force a re-read. And that are more solutions too ([2]):

$ sudo partprobe
# Or use fdisk
$ sudo fdisk /dev/sda
Command: v
Command: w
# Or use blockdev
$ sudo /sbin/blockdev --rereadpt /dev/hda
# Or use sfdisk
$ sudo sfdisk -R /dev/sda

Resizing Partitions

gparted

Probably one of the best way to edit/resize/move partition is to use the GUI tool gparted. It suports many different file systems, and allows for both resizing the file system but also updating the partition table.

If no GUI is available, here a few recipes for command-line.

Reiserfs

  1. Use resize_reiserfs to resize the partition, and get the new partition size
  2. resize_reiserfs -s -4G /dev/sda6               #Must be unmount
    df
    
  3. Change the partition table
  4. sudo sfdisk -d /dev/sda >sda-sfdisk.dump          # Edit sda-sfdisk.dump
    
  5. Run reiserfsck
  6. sudo reiserfsck --rebuild-sb
    sudo reiserfsck --fix-fixable
    

Mounting Partitions

See also reference pages above

Using /etc/fstab

Run sudo blkid to get the UUID number.

# NTFS
UUID=XXXXXXXXXXXXXXXXXXXXX /media/windows ntfs defaults,umask=007,gid=46 0 1

Partitions can then be mounted with mount <mount-point>

Using mount

# NTFS - mount point /media/windows must be chgrp plugdev
sudo mount -t ntfs -o defaults,umask=007,gid=46 /dev/sda1 /media/windows
# SAMBA
sudo mount -t cifs -o username=baddreams,allow_utime=22,umask=002,uid=1000,gid=124 //phoenix/D$ /net/phoenix/d