Serial Programming: Difference between revisions

From miki
Jump to navigation Jump to search
No edit summary
(→‎Tools: minicom and cutecom)
Line 34: Line 34:


=== [http://alioth.debian.org/projects/minicom/ Minicom] ===
=== [http://alioth.debian.org/projects/minicom/ Minicom] ===
[http://alioth.debian.org/projects/minicom/ Minicom] ([http://en.wikipedia.org/wiki/Minicom wikipedia]) is a text-based modem control and terminal emulation program for Linux.
'''[http://alioth.debian.org/projects/minicom/ Minicom]''' ([http://en.wikipedia.org/wiki/Minicom wikipedia]) is a text-based modem control and terminal emulation program for Linux.


It can be used to debug / test serial connections, but unfortunately it is only ascii based and does not allow to send / receive easily data in hexadecimal format (except via sending / receiving files).
It can be used to debug / test serial connections, but unfortunately it is only ascii based and does not allow to send / receive easily data in hexadecimal format (except via sending / receiving files).

Minicom is in the repositories:
<source lang=bash>
sudo apt-get install minicom
</source>


=== [http://cutecom.sourceforge.net/ Cutecom] ===
=== [http://cutecom.sourceforge.net/ Cutecom] ===
[http://cutecom.sourceforge.net/ Cutecom] is a handy and easy graphic tool to test/debug embedded devices controlled via serial link. This tool allows sending / receiving data in hexadecimal format.
[http://cutecom.sourceforge.net/ Cutecom] is a handy and easy graphic tool to test/debug embedded devices controlled via serial link. This tool allows sending / receiving data in hexadecimal format.

Cutecom is in the repositories:
<source lang=bash>
sudo apt-get install cutecom
</source>

Revision as of 22:09, 1 February 2012

References

How-To

Flush Serial Buffers

Use constant TCSAFLUSH for function tcsetattr (see [1] and [2]):

Constants for tcsetattr
Constant Description
TCSANOW Make changes now without waiting for data to complete
TCSADRAIN Wait until everything has been transmitted
TCSAFLUSH Flush input and output buffers and make the change

This can be done even on a serial port that is already configured:

  struct termios  options;
  tcgetattr(fd, &options);                   // Get current configuration of this port
  cfsetispeed(&options, B115200);            // Configure some port options (e.g. baud rate...)
  ...
  tcsetattr(fd, TCSANOW, &options);          // Apply the new settings immediately 
  ...                                        // Read / Write to the port...                       
  tcsetattr(fd, TCSAFLUSH, &options);        // Flush IO buffer

Tools

Minicom

Minicom (wikipedia) is a text-based modem control and terminal emulation program for Linux.

It can be used to debug / test serial connections, but unfortunately it is only ascii based and does not allow to send / receive easily data in hexadecimal format (except via sending / receiving files).

Minicom is in the repositories:

sudo apt-get install minicom

Cutecom

Cutecom is a handy and easy graphic tool to test/debug embedded devices controlled via serial link. This tool allows sending / receiving data in hexadecimal format.

Cutecom is in the repositories:

sudo apt-get install cutecom