Wifi: Difference between revisions

From miki
Jump to navigation Jump to search
Line 56: Line 56:
# face | tus | link level noise | nwid crypt frag retry misc | beacon | 22
# face | tus | link level noise | nwid crypt frag retry misc | beacon | 22
# wlp1s0: 0000 52. -58. -256 0 0 0 0 182 0
# wlp1s0: 0000 52. -58. -256 0 0 0 0 182 0
</source>


# Get available WiFi connections
nmcli c[onnection]

# Get Wifi Status
nmcli r[adio]

# If Wifi is down, turn it on:
nmcli r wifi on
</source>


Wifi is either controlled by '''NetworkManager''' or via the command line.
Wifi is either controlled by '''NetworkManager''' or via the command line.

Revision as of 19:49, 29 December 2019

References

Commands

  • iwconfig, get information or configure a wireless network interface
sudo iwconfig           # Get information
sudo iwconfig wlan0     # Configure
  • iwlist, get more detailed wireless information from a wireless interface
sudo iwlist scan
sudo iw dev wlan0 scan   # wlan0 or wlp1s0 or ...
  • rfkill, show state of RF SW/HW kill switch (WiFi / BT / ...)
rfkill list all

If using Network Manager:

nmcli connection show
# NAME                UUID                                  TYPE      DEVICE    
# testing             1eba2547-2cc2-4785-9288-f205aa6f533d  wifi      wlp1s0 
nmcli connection show "testing"
nmcli -f GENERAL,WIFI-PROPERTIES dev show wlp1s0

Utilities

Wavemon

See Linux commands.

Wifi PEAP

Troubleshoot wifi

# Check device
lsusb                # if wifi usb device
lspci                # if wifi pci device
lspci | egrep -i 'wifi|wlan|wireless'

# Check if device has an interface
iwconfig

# Check status interfaces
ifconfig

# Check signal quality
sudo iwconfig wlp1s0|grep -i quality
# Link Quality=52/70  Signal level=-58 dBm  
nmcli dev wifi
# IN-USE  SSID           MODE   CHAN  RATE        SIGNAL  BARS  SECURITY 
#         testing        Infra  13    270 Mbit/s  70      ▂▄▆_  WPA2     
watch -n 1 cat /proc/net/wireless
# Inter-| sta-|   Quality        |   Discarded packets               | Missed | WE
#  face | tus | link level noise |  nwid  crypt   frag  retry   misc | beacon | 22
# wlp1s0: 0000   52.  -58.  -256        0      0      0      0    182        0

# Get available WiFi connections
nmcli c[onnection]

# Get Wifi Status
nmcli r[adio]

# If Wifi is down, turn it on:
nmcli r wifi on

Wifi is either controlled by NetworkManager or via the command line.

NetworkManager
Command file
  • See file /etc/network/interfaces. See man page man interfaces
  • For WPA, see file /etc/wpa_supplicant/wpa_supplicant.conf.
Miscellaneous
  • Wireless deauthentication code from [1]:
  • About syslog wlan0: deauthenticated from 00:1d:7e:0c:24:5e (Reason: 14), see [2]:
    That means that the WPA encryption code is failing and the packet is corrupt. I would worry about that corrupt beacon from the AP.
  • Troubleshooting WiFi (opensuse post)
  • Getting info on WiFi (opensuse post)
3 Deauthenticated because sending station is leaving (or has left) IBSS or ESS.
14 MIC failure.